Pretvarač dužine tkanine u metre

The Fabric Yardage to Meters Converter converts fabric quantity between yards (1 yard = 0.9144 meters) AND adjusts for different bolt widths — critical when substituting fabric from US patterns specifying 44-inch wide quilting cotton to apparel fabric available in 60-inch widths, or vice versa. The width adjustment formula: Adjusted Yards = Original Yards × (Original Width / Target Width). If a pattern calls for 3 yards of 44-inch fabric but you have 60-inch fabric, you need only 3 × (44/60) = 2.2 yards. Standard fabric widths: Quilting cotton 44–45 inches. Apparel fabric (cotton blends, polyester, linen) 54–60 inches. Wool suiting 56–60 inches. Curtain/decorator fabric 54–60 inches. Specialty wide (canvas, upholstery, drapery) 60–108 inches. Cotton fashion fabric in Europe often 140 cm (~55 inches) wide. Most pattern publishers specify both fabric width and required yardage — substituting fabric of different width requires recalculation. Why width adjustment matters in real projects: a pattern requiring 3 yards of 44-inch fabric provides 132 inches × 44 inches = 5,808 square inches of fabric. The same project in 60-inch wide fabric only needs 5,808 ÷ 60 = 97 inches = 2.7 yards. Buying 3 yards of 60-inch unnecessarily wastes 0.3 yards = $5–20 in fabric cost. Conversely, switching from 60-inch to 44-inch requires MORE yardage — failing to adjust leads to running out mid-project. Layout considerations: width adjustment assumes pattern pieces can be laid out efficiently within new fabric width. Wider fabric usually allows better layout (multiple pieces side by side, fewer cuts needed). Narrower fabric may require multiple cuts of long pieces — adjust upward by 5–15% beyond simple math if pattern has many long pieces. For striped or printed fabric with directional design, additional yardage needed for pattern matching (typically 10–20% extra). Calculator gives baseline; experienced sewists add buffer based on fabric type and project complexity.

Calkulon makes complex calculations simple — built for students and everyday problem-solvers.

1. 1Step 1 — Enter yardage from pattern (the amount pattern requests)
2. 2Step 2 — Enter original fabric width pattern specifies (typically 44 or 60 inches)
3. 3Step 3 — Enter target width of fabric you actually have
4. 4Step 4 — Calculator converts yards to meters using 0.9144 factor
5. 5Step 5 — Calculator computes adjusted yards: Original × (Orig Width / Target Width)
6. 6Step 6 — Output displays meters and adjusted yards
7. 7Step 7 — Add 10–20% buffer for directional prints, plaids, or complex layouts

• !Buying based on yardage alone without checking fabric width
• !Forgetting that 44-inch quilting cotton ≠ 60-inch apparel fabric in substitution
• !Not adding buffer for directional prints or pattern matching
• !Buying exact pattern yardage without 10–20% buffer for mistakes
• !Confusing 'inches' with 'cm' on European fabric specifications